Arme y desarme completo de una Glock ( Fotos )
Publicado: Vie Feb 11, 2011 11:43 pm
Las instrucciones son breves pero en ingles, de todos modos se me ocurre que con las imagenes basta
Espero les sea util
Saludos Anibal
1. Properly clear your PISTOL (Place weapon on "safe", remove the magazine, pull or lock the slide to the rear, visually and physically inspect the chamber to ensure no round is inserted. Release the slide.
2. REMOVE SLIDE FROM FRAME
Pointing in a safe direction, pull the trigger on your pistol. Grasp the pistol and pull back the slide slightly (as shown on the photo to the right), while the slide is partially back, pull or press down the slide stop (slide stop is indicated by the red arrow). Release the slide while the slide stop is in a downward position. The slide should now slide off.
Photo of slide removed from frame.
3. REMOVE BARREL AND SPRING/GUIDE ROD
Pull the spring/guide up and out of the slide. The barrel can now be removed from the slide.
DISASSEMBLE SLIDE
Press down on the back plate of the slide and push it downwards off of the slide. You may have to depress the firing pin a little bit to do this, but I've never had a problem
The firing pin will pop out of the end as well as the extractor spring assembly. Pull them both out.
Push down on the extractor plunger (the little silver button on the slide) and wiggle your extractor loose. There's a tiny spring below the plunger so take caution not to misplace it.
Grab your firing pin as shown. Placing your finger behind the rear of the firing pin, depress the spring and shake the spring retainers loose. (Some people like to cheat and use a bit of cleaning cloth or something to stuff the plastic with).
Espero les sea util
Saludos Anibal
1. Properly clear your PISTOL (Place weapon on "safe", remove the magazine, pull or lock the slide to the rear, visually and physically inspect the chamber to ensure no round is inserted. Release the slide.
2. REMOVE SLIDE FROM FRAME
Pointing in a safe direction, pull the trigger on your pistol. Grasp the pistol and pull back the slide slightly (as shown on the photo to the right), while the slide is partially back, pull or press down the slide stop (slide stop is indicated by the red arrow). Release the slide while the slide stop is in a downward position. The slide should now slide off.
Photo of slide removed from frame.
3. REMOVE BARREL AND SPRING/GUIDE ROD
Pull the spring/guide up and out of the slide. The barrel can now be removed from the slide.
DISASSEMBLE SLIDE
Press down on the back plate of the slide and push it downwards off of the slide. You may have to depress the firing pin a little bit to do this, but I've never had a problem
The firing pin will pop out of the end as well as the extractor spring assembly. Pull them both out.
Push down on the extractor plunger (the little silver button on the slide) and wiggle your extractor loose. There's a tiny spring below the plunger so take caution not to misplace it.
Grab your firing pin as shown. Placing your finger behind the rear of the firing pin, depress the spring and shake the spring retainers loose. (Some people like to cheat and use a bit of cleaning cloth or something to stuff the plastic with).