Hola gente me comentaron de esta nueva categoria de IPSC, busque en el foro si habia alguna informacion pero no pude encontrar nada.
Por tal motivo dejo mi duda a los que saben si me pueden informar de que se trata es categoria.
Como de costimbre muy agradecido por sus tiempos.
Saludos.
IPSC - The Production Optics Division
- odisay
- Mensajes: 206
- Registrado: Jue Oct 25, 2012 10:55 pm
-
- Mensajes: 21
- Registrado: Mié May 22, 2013 11:20 pm
Re: IPSC - The Production Optics Division
Copiei do "Global Village":
This is the trial rule set being tested by most regions.
Production Optics-vp4.pdf (Updated from Version 3 to include the following):
17.2 Aftermarket open sights (see Rule 5.1.3.1) and mounting plates are permitted, provided their installation and/or adjustment requires no alteration to the handgun.
This is the trial rule set being tested by most regions.
Production Optics-vp4.pdf (Updated from Version 3 to include the following):
17.2 Aftermarket open sights (see Rule 5.1.3.1) and mounting plates are permitted, provided their installation and/or adjustment requires no alteration to the handgun.
-
- Mensajes: 21
- Registrado: Mié May 22, 2013 11:20 pm
Re: IPSC - The Production Optics Division
Resumindo:
1. Minimum power factor for Major Not applicable
2. Minimum power factor for Minor 125
3. Minimum bullet weight No
4. Minimum bullet caliber / cartridge case length 9 mm (0.354”) / 19 mm (0.748”)
5. Minimum bullet caliber for Major Not applicable
6. Minimum trigger pull (see Appendix E4a) 2.27 kg (5 lbs.) for first shot
7. Maximum handgun size Maximum barrel length 127 mm
8. Maximum magazine length No
9. Maximum ammunition capacity Yes, see below
10. Max. distance of handgun and allied equipment from torso 50 mm (see Rule 5.2.5)
11. Rule 5.2.10 / Appendix E2 applies Yes
12. Optical/electronic sights Yes, see below
13. Compensators, ports, sound and/or flash suppressors No
1. Minimum power factor for Major Not applicable
2. Minimum power factor for Minor 125
3. Minimum bullet weight No
4. Minimum bullet caliber / cartridge case length 9 mm (0.354”) / 19 mm (0.748”)
5. Minimum bullet caliber for Major Not applicable
6. Minimum trigger pull (see Appendix E4a) 2.27 kg (5 lbs.) for first shot
7. Maximum handgun size Maximum barrel length 127 mm
8. Maximum magazine length No
9. Maximum ammunition capacity Yes, see below
10. Max. distance of handgun and allied equipment from torso 50 mm (see Rule 5.2.5)
11. Rule 5.2.10 / Appendix E2 applies Yes
12. Optical/electronic sights Yes, see below
13. Compensators, ports, sound and/or flash suppressors No